|
The
32 ALL Pro is an
32nd Scale electronic controller featuring all the basics of the
Pro Series controllers.
Click here to review the Pro
Series Basic Features. It is intended for use with
All 1/32 cars. It features:
- 3 Range Adjustable Sensitivity. A 3 position switch
offers three different ranges to maximize the Sensitivity
adjustment. The Middle switch position is intended for most
1/32 cars. It provides a wide range that is set to run all but
the most sensitive cars at 12V. The Low (s) setting
provides a slightly slower range to handle the most sensitive
cars while reducing some of the top end range. When running on
10V the most sensitive cars will run fine on the Middle switch
setting. Cars running at 10V require more current to run the
same as on 12V. To provide this extra power there is the High
(S) setting. . For most 12V racing this setting will be too
much.
- 3 Range Adjustable Brakes. A 3 position switch offers
three different ranges of Brake 0-5 ohms (B), 5-10 ohms (Middle
switch position) and 10-15 ohms (b). This allows the user to
have fine control over a smaller range. When requiring a lot of
Brakes the switch can be moved to the far right position (B) for
the 0-5 range. . Keep the switch in the middle position for
10-15 ohm Brakes. Move the switch to the left position (b) for
the 10-15 range.
- Adjustable Choke. Choke will flatten out the response
of the controller. This allows the entire range of the trigger
to be used in controlling the car vice just a small portion.
The Choke is fully bypassed at the full trigger pull. Choke
increases the jump between the last band and the full power band
to achieve the flatter response. . This feature can be useful
when wanting to take the power just below full power for a
slower and repeatable speed trigger position, "blipping the
controller." The RED Brake wire does
not have to be connected for Choke to function.
|
|
32 ALL Pro Controls
Sensitivity Knob - Fully CCW is the
lowest sensitivity for the slowest starting speed within the
selected Sensitivity Range. Fully CW is the highest sensitivity
for the highest starting speed within the selected Sensitivity
Range.
Brake Knob - Fully CCW provides the lowest ohm brakes
(most brakes) within the selected Brake Range. Fully CW
provide the highest ohm brakes within the selected Brake Range
(less brakes).
Choke Knob - Fully CCW provides the most choke, the
flattest response. Fully CW provides the lowest choke or
normal linear response.
Sensitivity Selector Switch - With the switch in the (s)
position the Sensitivity knobs adjusts the lowest Sensitivity
Range. With the switch in the (S) position the highest
Sensitivity Range is selected. With the switch in the middle
the middle and most useful range is selected.
Brake Selector Switch - With the b/-/B switch in the
small b position (left side), the brake range is 0 (CCW)- 5 ohm
(CW). With the switch in the middle position, the brake range
is 5 (CCW) - 10 ohms (CW). With the switch in the big (B)
position (right), the brake range is 10 (CCW) - 15 ohms (CW).
To completely remove all braking the RED
Brake wire needs to be unplugged. |
|